Used Engine ECU Cloning Replacement

An Engine ECU – DME/ DDE as BMW call it, monitor and control the running of the engine. Unfortunately these can fail for various reasons. Most common is water damage, however internal faults causing misfires, incorrect sensor readings, or even a non start. This means the ecu requires replacement.

A new unit is usually expensive in the thousands, which can write off some older vehicles. Buying a used unit, you cannot simply plug into the vehicle and expect it to start, as programming and immobiliser codes set in the software will prevent this from being possible.

 

Fortunately we have specialist software & equipment allowing us to ‘clone’ transfer the data inside the original unit into a used donor unit, thus allowing it to be compatible with the vehicle, enabling it to start and run like the original (without the previous running faults).

If your BMW or MINI is at the dealer with an eye watering sum to replace a component. Give us a call to see if we can help

Fault investigation and diagnosis

You may also like