BMW i3 that will not charge with drivetrain warning – but what’s the problem?

Recently in the workshop with us was this 2019 BMW i3 (electric motor only version) with the fault complaint that the drivetrain warning light on
and does not charge externally when plugged into the wall.
Upon driving the car into the workshop, the drivetrain warning was present on the instrument panels.
First we checked the complaint by plugging the car into the wall with our own charging cable. As expected after attempting to charge, a red ring light around the socket appeared on to show a fault and unable to charge.
Next we carried out a diagnostic test to check the fault memory.
Fault codes were stored and present for the KLE – charging electronics, voltage measurement 1 & 2, internal fault.
The diagnostic computer guided us through the tests to be carried out.
Plugging in the vehicle to the wall whilst inspecting the voltages and status. After a static 5 minute test, nothing changed with a fault present.
The diagnostic system stated an internal fault with the KLE – charging electronics unit, which requires replacement. Fairly straightforward diagnosis there.
The KLE unit function is to distribute the charge from the wall socket connection to the vehicle, to the high voltage battery.
A new KLE isn’t cheap at £1,100
With our help & guidance, the owner opted for a 2022 used unit at a more sensible £450, from a reputable breakers yard
With the high voltage system safely powered down and checked.
We replaced the KLE, which was fairly simple on this model.
Once fitted, the high voltage system reconnected. The KLE had to be programmed to the vehicle to function correctly. All faults have now been cleared from the vehicle, no more drivetrain warning.
Followed by a road test, then test charge at the wall
Which now charges correctly. 
The vehicle owner even sent us a happy email before we had a chance to contact them. To say ‘wahoo the car is now charging’ as they got a notification on their phone from the BMW App linked to the car
From our experience, it seems the components on electric vehicles are large units, in some cases cannot be easily dismantled to replace individual parts. The quickest and most cost effective solution is to fit reliably sourced used units.
Especially when these vehicles age to keep them on the road!
If you have an electric or hybrid BMW or MINI with a fault. Don’t get done by the dealer, there is another way….
Burch Motor Works 










